Thanks for the reply. It worked to submit the Blink application, but I have a doubt. When I send this application only the base station receives it?
Best Regards, 2011/9/5 Rafael de Oliveira Costa <[email protected]> > Hi Marianna, > > here i'm using crossbow's motes and they works fine. to submit an > application type make micaz install,1 mib510,/dev/ttyUSB0. > > Rafael de Oliveira Costa > M.Sc. Student > PPGI / DCC - iNCE/ UFRJ > Rio de Janeiro, RJ, Brazil > > "The first step to getting the things you want out of life is this : decide > what you want" > Ben Stein > > > On Mon, Sep 5, 2011 at 11:32 AM, Marianna Araujo < > [email protected]> wrote: > >> I started using the crossbow's motes (MTS420 platform - micaz/mica2) and I >> have been problem. I tried send an application for the sources and now one >> of them isn't been recognized in network. I rebooted the other sources and >> they were ok. However, exceptionally this source, did not work. I've tried >> to upload the firmware, but I really do not know which firmware suitable for >> him. Can you tell me what should I do? >> >> Another thing, I couldn't submit an application for the motes, for >> example the blink application. In the notepad, after to compiling, I made >> "make micaz reinstall mib520 (because I use USB port), com3 (the lower >> port)" and I got the following error "MIB520 must be *defined, try "make >> micaz help". Stop". >> * >> Best Regards, >> >> -- >> Marianna Araújo >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > -- Marianna Araújo
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
