yes there are errors in the settings controlling the optimization level. The PPPRoute program basically is very close to filling up the available ROM in the 1611.
What source code are you compiling? Are you on the SVN development trunk? Regardless, I suspect you want to find the line in support/make/telosb.target that looks like: OPTFLAGS += -O and comment it out. That should then cause the compilation to us -Os optimization (which is minimize space). When you run into compilation problems you should always include the output of the actual compilation steps. That will increase the likely hood that someone will pay more attention to your problem. Also in the future try the output of "make verbose telosb". eric On Mon, Dec 26, 2011 at 11:07 AM, <[email protected]> wrote: > Hello. > > I am following this tutorial for Blip 2.0: > > http://docs.tinyos.net/tinywiki/index.php/BLIP_2.0_Tutorial > > And when I type this command: > > make telosb blip install bsl,/dev/ttyUSB1 > > This error message appears: > > > msp430-ld: region text is full (build/telosb/main.exe section .text) > msp430-ld: section .vectors [0000ffe0 -> 0000ffff] overlaps section .text > [00004000 -> 000108e7] > msp430-ld: build/telosb/main.exe: section .vectors lma 0xffe0 overlaps > previous sections > make: *** [exe0] Error 1 > > > I was downloaded the tinyos from: "svn checkout > http://tinyos-main.googlecode.com/svn/trunk/"; many times trying to fix > this problem, but it continued yet. > > Please someone could advice me what is the manner to compile it into the > telosb mote (http://www.advanticsys.com/cm5000.html) > > Thanks in advance. > > Alejandro. > > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
