Here is the source
http://enl.usc.edu/enl/trunk/tenet/doc/Recompile_Mote_Binary.HOWTO

Regards

On 24 February 2012 10:46, Eric Decker <[email protected]> wrote:

> what are you quoting from?
>
>
> On Fri, Feb 24, 2012 at 1:19 AM, Mubashir Rehmani <[email protected]>wrote:
>
>> Hello,
>>
>> Please see below to change the channel for CC2420
>>
>>  4.1. Modify the RF channel frequency
>>
>>       - You can change the RF channel frequency used by the motes.
>>         For example, to change the RF channel of the motes with CC2420 radio
>>         (e.g. telosb, micaz), put the following line at the end of the file
>>         'tenet/mote/apps/Makerules' and compile and install both
>>         'tenet/mote/apps/Tenet' and 'tenet/mote/apps/BaseStation':
>>
>>            CFLAGS += -DCC2420_DEF_CHANNEL=<your_channel>
>>
>>         where '<your_channel>' is the channel number in the range [13~26].
>>
>>
>>    4.2. Modify the RF transmit power
>>
>>       - You can change the RF transmit power used by the motes.
>>         For example, to change the TX power of the motes with CC2420 radio
>>         (e.g. telosb, micaz), put the following line at the end of the file
>>         'tenet/mote/apps/Makerules' and compile and re-install both
>>         'tenet/mote/apps/Tenet' and 'tenet/mote/apps/BaseStation':
>>
>>            CFLAGS += -DCC2420_DEF_RFPOWER=<your_power>
>>
>>         where '<your_power>' is the channel number in the range [3~31].
>>
>>
>> Regards
>> Mubashir Husain Rehmani
>>
>>
>>
>> On 24 February 2012 10:16, Sergio Valcarcel <[email protected]> wrote:
>>
>>> Hi,
>>>
>>> I did it a long time ago for the CC2420. It is easy but I do not
>>> remember how to exactly.
>>> I suggest you to enter into the platform, chipset or cpu directory and
>>> look for your particular radio chipset header. You will find the right
>>> module and method  there.
>>>
>>> Cheers!
>>> Sergio
>>>
>>> On Fri, Feb 24, 2012 at 8:32 AM, Prasanth P <[email protected]>wrote:
>>>
>>>> Dear all,
>>>>
>>>>    How can i select channel for communication in nesc programming. Am
>>>> using Telosb mote.
>>>>
>>>> Thanks in advance.
>>>>
>>>> --
>>>> Regards
>>>> Prasanth.P
>>>>
>>>>
>>>> _______________________________________________
>>>> Tinyos-help mailing list
>>>> [email protected]
>>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>>>
>>>
>>>
>>> _______________________________________________
>>> Tinyos-help mailing list
>>> [email protected]
>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>>
>>
>>
>>
>>  --
>> Mubashir Husain Rehmani
>>
>>
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> [email protected]
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>
>
>
> --
> Eric B. Decker
> Senior (over 50 :-) Researcher
>
>
>


-- 
Mubashir Husain Rehmani
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to