Hi everyone,
I finally resolved all the problems and made Deluge T2 work. Briefly
speaking, you have to send 'Stop' command to the network before injecting a
new image, that is, send this command:
tos-deluge serial@com#:115200 -s ( I use cygwin and telosb
motes)
to the network to stop the on-going dissemination among motes, then inject
the new image to the basestation and send '-d' command again.
For more details about the dissemination mechanism of Deluge T2, please
refer to this document:
http://www.delta.dk/imported/images/DELTA_Web/documents/Innovation/deluge.pdf
The document also talks about the
ERROR: Unable to erase the flash volume error: 1 data: []
Attempt the workaround for AT45DB...
ERROR: Unable to erase the flash volume error: 1 data: []
problem.
On Fri, Mar 30, 2012 at 3:27 AM, Xiaoyang Zhong <[email protected]>wrote:
> Hi, I solved this problem by replace the rechargablt batteries with a new
> pair of disposable batteries, whose voltage level is above 2.7V. Deluge T2
> will not reboot the mote if the voltage level is below 2.7V. For
> rechargable batteries, even if they are charged full, the voltage level is
> 1.2V per battery.
>
> However, I encountered another problem. Initially I programmed GoldenImage
> on the mote, and it can receive the new image of Blink, let's say version
> 1. Then I send reboot command to the mote and it rebooted successfully and
> the Leds started blinking. But when I tried to send another new image of
> Blink, let's say version2, to the mote, the mote did not response. Even if
> I add "DDELUGE_BASESTATION" or "DDELUGE_LIGHT_BASESTATION" into Makefile.
>
> Can someone help me with this?
>
> Thanks very much!
>
> Xiaoyang
>
>
>
> On Mon, Mar 26, 2012 at 11:06 PM, Xiaoyang Zhong <[email protected]>wrote:
>
>> Hi everyone,
>>
>> Currently I am studying how to use Deluge T2, with this tutorial:
>> http://docs.tinyos.net/tinywiki/index.php/Deluge_T2 . I use telosb mtoes
>> and everything goes well until the I reach the reprogramming step. I have
>> modified the apps/Blink program as the tutorial indicates, and successfully
>> injected the image to BaseStation.
>>
>> When I typed "tos-deluge serial@com4:115200 -d 1", the green led of mote
>> 1 began to blink. Was this the sign that mote 1 was reciving the new image?
>> When the green led stopped blinking, the green led and blue led were both
>> on, no blinking. It didn't respond to the command "tos-deluge
>> serial@com4:115200
>> -dr 1".
>>
>> But when I plugged mote 1 directly to the PC, I can retrive the image
>> information there. It turned out that the new Blink image is successfully
>> stored in its external memory.
>>
>> Can anyone give me some help? Thanks very much!
>>
>> Xiaoyang
>>
>>
>
>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
