Looks like you have a space between the comma and the n - remove that and it should work: make telosb install,1
HTH, Michiel From: [email protected] [mailto:[email protected]] On Behalf Of Siddharth Dagar Sent: vrijdag 13 april 2012 12:21 To: [email protected] Subject: [Tinyos-help] make telosb install, n not allotting id n to Mote make telosb install, n should allot the id n to the mote. In my case, irrespective of what n is, the id allocated is always 1. I wrote a very simple application where I set the Leds according to the TOS_NODE_ID. The output shown is always the led0 (001 i.e. 1) What could be the problem? I am using Tinyos-2.1.0 on Ubuntu 10.04 I've noticed in the tutorials, the output that the compiler throws on the screen when the command make telsob install, n is issued, is generally of the format - beginning, the nesc compiler output is shown, then writing TOS image appears and after that there is a line that starts with tos-set-symbols tos-set-symbols --objcopy msp430-objcopy --objdump msp430-objdump --target ihex build/telosb/main.ihex build/telosb/main.ihex.out-1 TOS_NODE_ID=1 ActiveMessageAddressC$addr=1 In my case, this line does not appear when I compile and install my application. It is in the this line that the TOS_NODE_ID is specified. I would be highly thankful if someone could help me out here. Thanks, Siddharth Dagar Undergraduate Student, Dept. of Electrical Engineering IIT Kharagpur
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
