Oh! My bad, sorry! Thanks a lot! It worked. Didn't know a space could make such a difference.
On Fri, Apr 13, 2012 at 4:53 PM, Michiel Konstapel <[email protected]>wrote: > Looks like you have a space between the comma and the n - remove that and > it should work: make telosb install,1**** > > HTH,**** > > Michiel**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Siddharth > Dagar > *Sent:* vrijdag 13 april 2012 12:21 > *To:* [email protected] > *Subject:* [Tinyos-help] make telosb install, n not allotting id n to Mote > **** > > ** ** > > > make telosb install, n should allot the id n to the mote. In my case, > irrespective of what n is, the id allocated is always 1. > I wrote a very simple application where I set the Leds according to the > TOS_NODE_ID. The output shown is always the led0 (001 i.e. 1) > What could be the problem? > > I am using Tinyos-2.1.0 on Ubuntu 10.04 > I've noticed in the tutorials, the output that the compiler throws on the > screen when the command make telsob install, n is issued, is generally of > the format - beginning, the nesc compiler output is shown, then writing TOS > image appears and after that there is a line that starts with > tos-set-symbols**** > > tos-set-symbols --objcopy msp430-objcopy --objdump msp430-objdump --target > ihex build/telosb/main.ihex > build/telosb/main.ihex.out-1 TOS_NODE_ID=1 ActiveMessageAddressC$addr=1**** > > In my case, this line does not appear when I compile and install my > application. It is in the this line that the TOS_NODE_ID is specified. > I would be highly thankful if someone could help me out here. > > > Thanks, > Siddharth Dagar > Undergraduate Student, Dept. of Electrical Engineering > IIT Kharagpur**** > -- Thanks, Siddharth Dagar IIT Kharagpur
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
