Hi Gustavo, Thanks for the reply. But I want to set power to minimum or probably 0(initially) and then periodically increase transmission power. I suppose, I won't be able to achieve that by setting flag. Please correct my understanding.
Thanks. JEnis From: Gustavo Zanatta Bruno [mailto:[email protected]] Sent: Tuesday, November 06, 2012 6:13 PM To: Modi, Jenis Ashokkumar Subject: Re: [Tinyos-help] Set Transmission Power on Telosb motes The range of transmission power for the RF230, radio is used by IRIS (0 to 15) or ( 0x0 to 0xF), thus for example for the transmission power of the radio simply setting a flag in MAKEFILE with the following content: PFLAGS+=-DRF230_DEF_RFPOWER=0xf //Maximum Power PFLAGS+=-DRF230_DEF_RFPOWER=0xf //Minimum Power If radio used by Telosb is CC2420, do: Micaz or TelosB: PFLAGS+=-DCC2420_DEF_RFPOWER = 31 / / Maximum Power PFLAGS+=-DCC2420_DEF_RFPOWER = 1 / / Minimum Power 2012/11/6 Modi, Jenis Ashokkumar <[email protected]<mailto:[email protected]>> Hi All, I want to set/change the transmission power for my experiment, How do I perform this in tinyos 2.x ? Thanks. Jenis _______________________________________________ Tinyos-help mailing list [email protected]<mailto:[email protected]> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Atenciosamente: Gustavo Zanatta Bruno Mestrando em Ciência da Computação Pesquisador Laboratório Tempo Sistemas de Tempo Real e Embarcados
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
