I am using Tomcat 5.0.19 and using context tag within the server.xml file
is not recommended. Do you still want me try with this one?
Thank you,
Best Regards,
Uma
"Parsons
Technical
Services" To
<parsonstechnical
@earthlink.net> "Tomcat Users List"
<[EMAIL PROTECTED]>
03/29/2004 12:31 cc
PM
Please respond to
"Tomcat Users
List" Subject
<[EMAIL PROTECTED] Re: Configuring Tomcat on different
rta.apache.org> IP's
Okay to continue,
In the Server element you can declare two services. In one service you
would
have the connector for the http and the context for your application. Note
unless someone can tell me how to control which service a context is
associate you will have to put your context in the server.xml.
In the other sevice you will declare the https and the other context.
Now for clarification I have NOT done this before and am basing it on what
I
read from the config documentaion.
If you look in the server.xml file you will find the connector declaration
for the http. If you have NOT used the admin application, you will also
find
the connector for the https but it will be commented out <!-- --> .
To try this first make a copy of the server.xml.
Next copy and paste the service section from start tag <service .... to
finish tag </service> and paste it right after the service finish tag.
In the second service tag you will need to change the name on the service
and maybe the engine.
Then comment out the http connector and uncomment the https connector.
Add the address= to each connector.
Add the context for your applications in the appropriate service.
Restart tomcat and see what the logs say.
Again, I have never done this. But the configuration docs say:
Quote
The following components may be nested inside a Server element:
Service - One or more service element.
GlobalNamingResources - Configure the JNDI global resources for the server.
Unquote
So having two services is okay.
Now can someone tell me which service an application will be associated
with
if you use the context.xml in the app?
Give it a try and read up on the docs at:
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/config/server.html
Good luck.
Doug
----- Original Message -----
From: "Parsons Technical Services" <[EMAIL PROTECTED]>
To: "Tomcat Users List" <[EMAIL PROTECTED]>
Sent: Monday, March 29, 2004 1:26 AM
Subject: Re: Configuring Tomcat on different IP's
> Clicked too fast. There is more to come...
>
> ----- Original Message -----
> From: "Parsons Technical Services" <[EMAIL PROTECTED]>
> To: "Tomcat Users List" <[EMAIL PROTECTED]>
> Sent: Monday, March 29, 2004 1:19 AM
> Subject: Re: Configuring Tomcat on different IP's
>
>
> > Uma,
> >
> > I think this will do what you want.
> >
> > For each connector defined, one for http and one for https use the
address
> > attribute to specify the IP to listen on.
> >
> > So in the https connector use address="192.68.xxx.xx1" and Tomcat will
> > listen on 192.68.xxx.xx1 for only https request.
> >
> > On the http connector use address="192.68.xxx.xx2" and Tomcat will
listen
> > only for http request on 192.68.xxx.xx2 .
> >
> > Remember this affect all applications running on this instance of
Tomcat.
> >
> > See this for details:
> >
> > http://jakarta.apache.org/tomcat/tomcat-5.0-doc/config/http.html
> >
> > Doug
> >
> >
> > ----- Original Message -----
> > From: <[EMAIL PROTECTED]>
> > To: "Tomcat Users List" <[EMAIL PROTECTED]>
> > Sent: Sunday, March 28, 2004 11:58 PM
> > Subject: Re: Configuring Tomcat on different IP's
> >
> >
> > >
> > >
> > >
> > >
> > > Doug,
> > > Thanks for the reply. It is just for security reasons out network
> > > administrator has planned to do. So, I need to configure as such. I
have
> > > made the settings in the code to see if the user is using http or
https
> > and
> > > block the user from using http.
> > >
> > > But there should be some way of doing this, right?
> > >
> > > Thank you,
> > > Best Regards,
> > > Uma
> > >
> > >
> > >
> > >
> > > "Parsons
> > > Technical
> > > Services"
> To
> > > <parsonstechnical
> > > @earthlink.net> "Tomcat Users List"
> > >
<[EMAIL PROTECTED]>
> > > 03/29/2004 11:23
> cc
> > > AM
> > >
> > >
> > > Please respond to
> > > "Tomcat Users
> > > List"
> Subject
> > > <[EMAIL PROTECTED] Re: Configuring Tomcat on
> different
> > > rta.apache.org> IP's
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Uma,
> > >
> > > First don't take this wrong but I got to ask Why?
> > >
> > > Someone with more knowledge will have to chime in to say if this can
be
> > > done. But if the goal is to send all request for
http://www.mysite.com
> to
> > > https://www.mysite.com then Tomcat can do this for you. And without
two
> > > IPs.
> > > For details see;
> > > http://marc.theaimsgroup.com/?l=tomcat-user&m=104951559722619&w=2
> > >
> > > If you have some special reason for the two IPs then, never mind....
> > >
> > > Doug
> > > www.parsonstechnical.com
> > >
> > >
> > > ----- Original Message -----
> > > From: <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Sunday, March 28, 2004 11:23 PM
> > > Subject: Configuring Tomcat on different IP's
> > >
> > >
> > > >
> > > >
> > > >
> > > >
> > > > Hi,
> > > > My Tomcat 5.0.19 configuration is typical. I have got 2 IP
addresses
> > > > (202.200.xxx.xx1 and 202.200.xxx.xx2) which are pointing to 2
internal
> > IP
> > > > addresses (192.68.xxx.xx1 and 192.68.xxx.xx2)
> > > >
> > > > I have registered one domain name (www.mysite.com). The entire site
> > > should
> > > > work only on https://
> > > >
> > > > I need to configure this domain in such a way that the first IP
> address
> > > > (202.200.xxx.xx1) will have only one page(dummy jsp page that will
fwd
> > to
> > > > https home page of the site) and this IP address will accept only
80
> > > port.
> > > >
> > > > The second IP address (202.200.xxx.xx2) will server only 443
requests.
> > > And
> > > > the pages that are accessed in https should not be accessed by http
> > > > protocol.
> > > >
> > > > I understand that I need to create 2 contexts and place the dummy
jsp
> > > page
> > > > in one context and the rest of the files in the 2nd context.
> > > >
> > > > But how do I configure that the first context should work only on
80
> and
> > > > the second context should work only on 443 port?
> > > >
> > > > Any help would be great.
> > > >
> > > > Thanks
> > > > Uma
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > For additional commands, e-mail:
[EMAIL PROTECTED]
> > > >
> > > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> > >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
