Brad, I guess there's more voodoo to unroll regarding Marantz x200's. It would be most helpful if you could send me the CCF that TSS likes and the version that Tonto stores then retrieves back from the remote. I can then do some low-level bit snooping.
I've been using TSS 1.0.14 to verify CCF's emitted by Tonto (using convert). However, I don't have very complex or large CCF's so it's likely that I missed some nuances. It's somewhat unfortunate that the remote likes the CCF while TSS does not. This makes it very difficult for me to validate my work without a) a lot of your help or b) a Marantz x200 remote. What do you mean by 'manipulate graphics'? I think you reported an image save (for external editing) bug which I've already added to my todo list. I'll look into the delay bug. There was a version of Tonto way back that had a delay action bug, but that was fixed. It's possible that when I lost my disk a few months ago, I restored a version that still had this bug. These are probably relatively simple fixes. If I can sort this out in a few days, I'll probably just drop this silly version number constraint and jump to 1.10. It was my goal to co-release the source with that version, but it still contains a couple of proprietary pieces that I have to edit out before it's free and clear. regards, stewart On Wed, 26 Jun 2002, Brad Spachman wrote: > At 8:37 AM -0400 6/24/02, Stewart Allen wrote: > > Stewart, > > It's with some chagrin that my privately reported success with my > Marantz 5200 must be qualified. I've been about 1/2-done creating a > new CCF for my remote. Using Touch Screen Setup & Virtual PC, I've > been able to load it into the remote & into TSS to work on. > > On Monday, Tonto 1.099 was able to do the same thing. I was able to > upload the CCF from the Marantz to Tonto, edit it, and successfully > download it back to the Marantz. The remote seemed perfectly happy, > and all my programmed functions seem to work just fine. > > Since that time, I've used Tonto quite a bit to edit the CCF, > download it to the Marantz, etc. The remote has continued to function > properly. However, in order to work around a couple of the problems > I'm having with Tonto (unable to add delays to action lists, unable > to manipulate graphics), I had to go back to TSS. The problem is that > TSS does NOT open the CCFs I have edited with Tonto, nor does it > successfully open the CCF from the remote itself that was saved to > the remote from Tonto. TSS gives me the "Not a 5200 configuration" > error when loading the CCF from either the remote or from the saved > file. The CCF I have saved prior to editing with Tonto opens fine in > TSS. I'm finding it odd that the remote itself seems forgiving with > my CCF, but TSS is not. > > Has anyone else seen this kind of behavior? > > Any suggestions? Would any logs be helpful? > > (OSX 10.1.5, Tonto 1.099, TSS 1.0.14, Marantz 5200) > > Best, > Brad ------------------------------------------------------- This sf.net email is sponsored by: Jabber Inc. Don't miss the IM event of the season | Special offer for OSDN members! JabberConf 2002, Aug. 20-22, Keystone, CO http://www.jabberconf.com/osdn _______________________________________________ Tonto-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/tonto-users
