Bob, IMHO what you described would be a linear loaded loop and the folded down wires should be at the top and the feed where you described. This avoids some feedline interaction. But remember such an antenna depending on spacing from the tower will couple significant energy to the tower itself. So all bets are off on getting mostly horizontal polarization. The loop itself, even feed at the bottom center will still have some of that. My suggestion, but you should model it first, is to pull the bottom section away at a 45 degree angle from the tower so you have a sloping Delta Loop. This would probably help reduce tower interaction a bit. But the most ardent supporters of Delta loops recommend wooden support poles and corner feeding for best DX work since the vertical component is what really helps you on the low bands.
73 Herb KV4FZ On 1/7/2012 8:29 PM, Bob K6UJ wrote: > I am panning to try out a top loaded delta loop for 80 meters strung off the > side of my tower. > I want to have a horizontally polarized loop. I will feed at the middle of > the bottom horizontal leg. > Does the loading wire attach to the apex at the top on this loop ? > > thanks, > Bob > K6UJ > > > _______________________________________________ > _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK