I forgot to include the part number of the red sleeve connectors - SNS1P6U
73 NA4M On Nov 17, 2014, at 3:06 PM, Phil Duff <[email protected]> wrote: > There are different SNS F connectors. The SNS connectors will have different > sleeve colors depending on application. > > http://www.tnb.com/pubint/docs/snapnseal.pdf > > I use the red sleeve connectors on flooded double shielded Commscope RG6. > Using the recommended stripping and compression tool and fold the braid back > and it goes on easily and fits fine. > > 73 Phil NA4M > > > > On 11/17/2014 14:44, Tony K1AMF wrote: >> Anyone have any suggestions on how to install compression connectors on >> flooded RG6 quad shield coax with PE jacket? I'm using Belden Snap-N-Seal >> RG6QS compression connectors but they're nearly impossible to slip on far >> enough. I've tried removing the outer braid and foil and still no luck. >> Maybe I should be using different connectors? The coax I'm using for the >> beverage is Commscope F6SSEF / 4561804. > > -- > Phil Duff > Georgetown, TX > > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband -. .- ….- -- Phil Duff na4m[at]suddenlink.net _________________ Topband Reflector Archives - http://www.contesting.com/_topband
