Hi Frank Thanks for the information, so 2% will be good, nice!
I will do bolted connections to a DXE radial plate, but I was asking about soldering the wire to a terminal to be bolted to the radial plate HNY!! 73, Jorge CX6VM/CW5W Enviado desde mi iPhone > El 30/12/2014, a las 22:58, [email protected] escribió: > > Hi Jorge, > > Very high cost silver solder isn't needed for radial connections. Any > mechanically and electrically secure connection that achieves and > maintains about an ohm or less of connection resistance will have an > undetectable affect on the the performance of your antenna (much > less than 1 dB) compared to lossless radial connections. Thats why > bolted connections are so popular and just as effective.as silver solder. > > 73 > Frank > W3LPL > > > From: "Jorge Diez CX6VM" <[email protected]> > To: "Topband" <[email protected]> > Sent: Wednesday, December 31, 2014 12:27:40 AM > Subject: Topband: Silver solder > > Hello > > I read about using silver to solder wire radials to terminals > > This week I decided to ask sellers about silver solder and they offered me a > 2% and 30% silver bars > > What we need for our use? Will be ok to use 2%? The difference in price is > extremely high! > > Thanks, > Jorge > CX6VM/CW5W > > Enviado desde mi iPhone > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > _________________ Topband Reflector Archives - http://www.contesting.com/_topband
