Hello Anton I thoroughly recommend the K2AV folded counterpoise that I use (248 countries wkd on 160 in 6 years). Read k2av.com. He suggests that it might be equivalent to 4 elevated radials. The counterpoise is easy to construct yourself. The balun is available from balundesigns.com or easy to construct yourself too. It would be very useful if you have an antenna analyser for final matching. Contact me off reflector if you want help with. 73 John G3XHZ
Sent from my iPhone > On 16 Jan 2019, at 03:12, [email protected] wrote: > > Hello Anton, > > > One elevated wire will work, more than one will work much better. > > > Elevated wires must be near resonant length, a good starting point > is to make your wire about 125 feet (38 meters) long > > > Good luck! > > > 73 > Frank > W3LPL > > > > > > > ----- Original Message ----- > > From: "Anton Moehammad via Topband" <[email protected]> > To: [email protected] > Sent: Wednesday, January 16, 2019 3:07:07 AM > Subject: Topband: elevated radial > > Hello All,I wondering if You can give me advice about some unclear thing for > my second attempt 160m antenna. I can put a vertical antenna but > unfortunately there is no way I can lay down my ground in or on the ground > the best I can is put the ground wire at least 3m above average ground > because its an corn field, is there anything I need to worry or pay attention > about it ?with my 80m inverted V antenna my S meter go as high as S9 for > 160m. any advice. I live in YB land and this is my second attempt to be on > air on 160 any advice will appreciate. > thank You. > Anton > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
