In the torrc file, type QRPort then a space then the port number you want to run your relay on.
If you haven’t, make sure the port you choose is configured for port forwarding on your router (or firewall if your using one). In some brands of router, I know apple and Netgear made routers, the port may not be blocked, but not configured for port forwarding which is required for relays to send and receive information to and from the tor network. To make sure this is not the issue, i would recommend creating a router / firewall rule to allow port forwarding on which port number your trying to run your relay on. Cheers. > On Jul 5, 2018, at 9:18 PM, I <beatthebasta...@inbox.com> wrote: > > Thank you, > > It is a Raspberry Pi tethered to a cellphone with bulk data and fair speed > which is much faster than a landline and modem would be. Telstra guaranteed " > nought bytes/sec ". > > Grarpamp said >> >> ... a block is a block. Either get it lifted, or >> vpn / shell / proxy / tunnel around it, > > How? Go on... > > > The torrc manual says this. > ORPort [address:]PORT|auto [flags] > Advertise this port to listen for connections from Tor clients and servers. > This option is required to be a Tor server. Set it to "auto" to have Tor pick > a port for you > > Does that mean ORPort myapparentip:Auto ? > ORPort Auto is rejected. > > Robert > > > _______________________________________________ > tor-relays mailing list > tor-relays@lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
