Strange, I thought it would just connect and automatically load the older firmware.
I've never used it, but you can supposedly place a copy of the firmware on a USB stick or SD card (in the root directory) and the Touch will update to it. You can download the current 7.5.4 firmware 'from here' (http://update.slimdevices.com/update/firmware/7.5.4). Download the two files 'fab4.version' and 'fab4_7.5.4_r9408.bin'. There is a mechanism on the Touch for reverting to the previously loaded firmware. Apparently the flash memory holds copies of both the current and older firmware in case something 'really bad' happens. However, this is likely to fix your problem only if the previous version of the firmware was from 7.5.x. If it was also from 7.6 then you're going to be in the same spot. To revert the firmware: On the remote press and hold the volume up button while pressing and holding the reset button on the back of the Touch. After 15 seconds or so you should see a message on the Touch. You could probably also go into the web interface's Settings > Advanced > Software Updates and disable updates and downloads. This might suppress the message on the Touch and allow it to connect to the server. But you may not want to keep that setting if you want to be notified of future updates. -- JJZolx ------------------------------------------------------------------------ JJZolx's Profile: http://forums.slimdevices.com/member.php?userid=10 View this thread: http://forums.slimdevices.com/showthread.php?t=87237 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
