Its also critical to set the sample bits. In post 113 I said to set it to 32, it turns ANYTHING other than 24 sets it to 16 bits, so you might as well set it to 16 so its not confusing.
This works with the HRTs because they can accept data in either 16 or 24 bit format. Many other asynch DACs only work at 24, and usually in a 24 bit format that the firmware in the Touch does not support. So by using the asound.config you posted and setting the buffer to greater than 50000 and the samplebits to 16 you can make the HRTs work very well. It seams like every asynch DAC is a different beast and needs a different set of parameters to work. This particular setup works for the HRTs, but will not work for many others. Have fun! John S. -- JohnSwenson ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=82110 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
