Heres mine.... # brand: NAD # model no. of remote control: 451 # devices being controlled by this remote: Various Amplifiers/CD Players/Tuners #
begin remote name NAD bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9096 4352 one 622 1600 zero 622 500 ptrail 622 repeat 9020 2160 pre_data_bits 16 pre_data 0xE13E gap 107432 toggle_bit_mask 0x0 begin codes Standby 0x01FE Power-On 0xA45B Power-Off 0x13EC Speakers-A 0x738C Speakers-B 0xF30C VolumeUp 0x11EE VolumeDown 0x31CE Mute 0x29D6 Input-Video1 0x43BC Input-Video2 0x03FC Input-Video3 0x837C Input-Aux 0xD926 Input-Disc 0x916E Input-CD 0xA15E Input-TunerAM 0x41BE Input-TunerFM 0x817E Input-Tape2 0x8976 Input-Tape1 0xB14E Tuner-Bank 0x24DB Tuner-PresetRight 0x4BB4 Tuner-PresetLeft 0x8B74 CD-PlayPause 0x807F CD-Stop 0x40BF CD-Play 0x807F CD-Pause 0x52AD CD-Previous 0xA05F CD-Next 0x609F CD-Disc 0xE817 TapeA-Play 0xCA35 TapeA-Rev 0x2AD5 TapeA-Stop 0x4AB5 TapeA-Record 0xAA55 TapeA-FastForward 0x6A95 TapeA-Rewind 0xEA15 TapeB-Play 0x39C6 TapeB-Rev 0x7B84 TapeB-Stop 0xF906 TapeB-Record 0x59A6 TapeB-FastForward 0xB946 TapeB-Rewind 0x7986 end codes end remote Of course I only use on/off and I think that's all that works on the SBTouch. As that's all I need I haven't tried any others. It may give you an insight into what changes are needed. I used an ir led from an old dvd renmote connected to a a 3.5mm 2 contact jack plug and taped the led over the ir sensor on the nad. Worked a charm first time. Of course get the polarity right on the led or nothing will happen. (Don't think it does any damage, but don't quote me). -- Gerry123 ------------------------------------------------------------------------ Gerry123's Profile: http://forums.slimdevices.com/member.php?userid=31336 View this thread: http://forums.slimdevices.com/showthread.php?t=93666 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
