JohnSwenson;692801 Wrote: > Yes you can assign a static IP address, connect your laptop up directly > to the SBT, no router no nothing, just an ehternet wire from the laptop > to the SBT. Boot the SBT. Select settings->advanced->Networking->Choose > Network. > Select "Connect to Ethernet Network". It will try for awhile and > eventually give up. In the menu that pops up choose to manually enter > the IP information. Follow the screen and enter the information. You > should now be setup. Note you will need a IP address, subnet mask, > gateway and DNS.
I wonder why they didn't make it a bit easier to assign a static IP address. I must admit, I just assumed, you couldn't do it! I guess it would do the same if you turned off the DHCP server on your network temporarily while you set up the networking. -- UV101 SB3 Deep Blue screen - 2 Clocks, 3 Low noise regs, SEPC & ZA caps, External PSU 80VA, Hexfred & Mundorf SI, RA Signature PowerKord. Audio Aero Capitole MKII Spinner & DAC, RESTEK fantasy (modded), Heavily modded SL-1200MKII,Denon DL-103L by Expert Stylus Co (Sapphire Cantilever & custom Diamond stylus),Classe Processor, Focal 706v kimber rewire and Mundorf Supreme in crossovers, 8TC speaker cables, Kimber power cables & NNUX mains filter. ------------------------------------------------------------------------ UV101's Profile: http://forums.slimdevices.com/member.php?userid=37086 View this thread: http://forums.slimdevices.com/showthread.php?t=93706 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
