jeffcdo wrote: > Wow! I just tested this out and it's working great. I had tried the > USB output earlier when it was still being tested and was suffering from > pops and clicks - I didn't really understand the use of the USB hub > until I read some of the further comments on the link you sent, that > took care of the problem. Thank you. > > EDIT: Well, you didn't send the actual link but the info...here's the > link > http://forums.slimdevices.com/showthread.php?94512-Announce-Enhanced-Digital-Output-app-USB-Dac-and-192k-Digital-Ouput
Yes, I should have linked as well. Thanks for putting that there for others to find. Incidentally, you might want to know that the 5V USB supply from the Squeezebox Touch had dropped to 4.6V by the time it was powering the AudioEngine D1 and a bus-powered hub. This is just outside of the official USB spec limits and some production samples of the AE D1 don't switch on properly with this lower bus voltage (out of two samples in my possession, one does and the other doesn't). I have to use an AC powered hub to get a supply that will positively switch on the AE without hesitating or, worst-case, having the reed relay in there chattering between on and off states. Just a heads-up for you and anyone else considering this combo. I actually like to have an AC powered hub in the way, since I can get cleaner power to the DAC that way. Enjoy... ------------------------------------------------------------------------ dsdreamer's Profile: http://forums.slimdevices.com/member.php?userid=12588 View this thread: http://forums.slimdevices.com/showthread.php?t=94476 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
