I've had a PM about how I did the wiring so thought I would share for all. The room which this is in is an upstairs ensuite and a partition wall between the bedroom and ensuite, the loft is directly above so i dropped all the wires down through the partition wall, I initially dropped them outside of the partition wall as trying to get the power, audio and ethernet through the stud work would have just been too hard with the tools i had, i then just scraped the plaster away over the wood and layed them in there and polyfilled over. if i had cable grips, staple gun i would have used, there will be lots of ways of getting cables and I now I could have done mine neater but it tidied up fine, I had to actually drop out of the loft originally 30cm left as that's the closest i could get from the loft space, I will share more pics at a later date.
As i've mentioned already I think using one of these mounts is a priority to have the power accessible elsewhere as if you use good heavy duty double sided tape it is highly likely it will break when you try and pull it off the wall at a later date. I have an amp in the loft which is always on which feeds a single KEF RC6S http://www.polkaudio.com/customaudio/rci/index.php?s=rc6s ------------------------------------------------------------------------ trouty00's Profile: http://forums.slimdevices.com/member.php?userid=30875 View this thread: http://forums.slimdevices.com/showthread.php?t=95114 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
