zaras27 wrote: > Yes of course all the rest are working .The only output that is not > working id the optical
The coax S/PDIF and optical S/PDIF come off the same wire on the board, so there is nothing you can do with software that will make one work and one not. Since the coax digital out is working that means the software is setup correctly, so it has to be a hardware issue. If the rest of the chain works correctly (different optical source but the same optical cable, same DAC, same analog cable, amp, speakers etc) then it must be a broken Touch. Before replacing the Touch make sure the above is true, the easiest way to do this is: 1) Coax digital out works. Use whatever DAC, AVR whatever input you have that can read coax S/PDIF 2) Optical digital out does not work. Use exactly the same Touch and LMS settings as #1. DAC, settings etc will be different because you are using optical input rather than coax input. 3) Rest of the chain starting from the optical cable forward works. Use a different optical source, it does not have to squeezebox related, it can be DVD player, game console, whatever. Just as long as you use the same optical cable, same DAC and settings, same amp etc. If both #1 and #2 and #3 are true its a Touch hardware issue. John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=100195 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
