mjg wrote: > Hello > > I went through the process of converting the USB port on my Touch to a > "out" instead of an "in" about 3 years ago, before there was an app. > This was done by getting into the device and running command lines. It > took me forever to get right. It never really worked that great and I > kind of forgot about it. Now I want to use the touch as it was designed. > I performed a hard reset as I thought this would return the device to > factory settings. I now can hear tones when I go through the menu's but > although it shows music is playing on the screen, I get no music. Any > help on this would be appreciated. > > Thanks, Maurice
Welcome Maurice, try this; To revert everything back to the original stage and factory defaults: - Power on the SBT - Hold down the little reset button on the back of the SBT just above the DC power plug for 10 seconds. This does the factory reset of the settings, but NOT of the installed Kernel ! - Let the SBT boot up to "Factory Settings". - Go to the Software Updating Menu (in settings, extended settings) - Force to "update" the Logitech Firmware - Let the SBT boot up completely. - Do another factory reset This procedure is copied from another website, if you search in the EDO threads there is also an uninstall procedure, pretty much the same if I remember, or not:p atb Ronnie ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=102579 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
