SqueezedUser wrote: > Hello Community, > > After a factory reset of one of my Squeezeboxes Touch it is impossible > to get the home screen back after the language selection and then an > endless "Verify Ethernet Connection" hourglass running... > > *Squeezebox Touch Connectivity Details*: > > > > - Firmware 7.8.0 r16754 (running since a long time) - Hardware Version 5 - Switched Power Supply from other Squeezebox (OK) - Ethernet Only connection directly to the Internet Box router > (fibre router) - DHCP is active in the router (and the SBT gets one and is pingable > on that address) - No MAC-Filter in the router - No Firewall in the router - Ports 9000 and 3483 are fed through (other Squeezebox Touch and > Squeezebox Radio are still running fine) - All the Squeezeboxes are directly connected to mysqueezebox.com - mysqueezebox.com (52.31.254.173 and 34.247.45.207) are reached > normally by the other Squeezeboxes - > > > > > *Problem*: > Upon power on, reset, factory-reset again with or without "+"-button > or volume-up-button or "home"-button pressed on the remote control at > the same time, the Squeezebox Touch gets to the language screen and > then remains in the Ethernet Connectivity Check "Verifying the > Ethernet Connection" forever... > > *Observations*: > > > - The problematic Squeezebox Touch gets its local IP-address and can > be pinged. Of course, it refuses any SSH-connection since it has > been factory reset and cannot be configured because of the home > screen not willing to appear... - I noticed exactly the same behavior with a FAT-formatted SD-card > inserted with a former fab4.bin firmware (downloaded from > slimdevices) on it (at top-level), hoping it would be detected and > asked for an optional downgrade... BTW, on inserting the SD-card > after powered on, the latter is recognized and the Squeezebox Touch > Server menu appears (no way to proceed to a firmware-modification > however). Thereafter the endless Verify Ethernet Connection is back > forever... Apparently no way to get the home screen in order to > manually configure the SBT! - > > > > > *Question*: > => Is there any way to get over this endless Ethernet Connection > checking? Is there any hidden serial port or JTAG (eventually to be > soldered) on the board to access the device and to force the home > screen to appear? > > > > Many thanks for your help > > Kind regardsThis sounds very like the issue in this thread. https://r.tapatalk.com/shareLink/topic?url=https%3A%2F%2Fforums%2Eslimdevices%2Ecom%2Fshowthread%2Ephp%3Ft%3D112228&share_tid=112228&share_fid=813&share_type=t&link_source=app
Sent from my Pixel 3a using Tapatalk ------------------------------------------------------------------------ slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=112287 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
