If you clean the old sticky rubber off completely you will lose any symbols or logos.
You could try a rubber coating spray, I did the rubber coated parts of a Boom renovation with a clear rubber coating spray, not the easiest thing I've ever done but pleased with the result: 31930 Here's the Boom before: 31931 Certainly the rubber coated bits are no longer sticky and the feel is the same as original, but I can't say how long it will last. One of the guys on here suggested that if you wash the rubber coating in hot water first it cleans it up well enough to be sprayed once air dried. Worked reasonably well on my Boom project. Because it has no symbols I used the knob as a test piece trying various chemicals to see if any could provide a miracle clean - ended up trashing the coating completely so stripped it right back to plastic, then polished and rubber coating sprayed it. Cheers Kev +-------------------------------------------------------------------+ |Filename: Boom_Beforevsm.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=31931| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ KeBul's Profile: http://forums.slimdevices.com/member.php?userid=32883 View this thread: http://forums.slimdevices.com/showthread.php?t=113102 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
