K7EK-7>T7PVVR,WIDE1-1*,WIDE2-2:'2=.l":k/]"4q}
K7EK-5>WL2KUS-5,VBALDI*,WIDE2-1:K7EK-5 RMS/TELPAC NODE - 144.35 mhz 9600 baud.
TACOMA>APU25N,VBALDI*,WIDE2-1:=4704.21NI12220.88W#- K7EK 144.35 9600
BAUD APRS {UIV32N}
VBALDI>APU25N,WIDE2-1,14435:!4713.14NS12150.61W#PHG5830/N7FSP (VBALDI
WIDE) 144.35mhz 9600 BAUD
VBALDI>APU25N,WIDE2-1,14435:!4713.14NS12150.61W#PHG5830/N7FSP (VBALDI
WIDE) 144.35mhz 9600 BAUD
TACOMA>APU25N,VBALDI*,WIDE2-1:>300701z= 144.35 MHZ 9600 BAUD IGATE =
TACOMA>APU25N,VBALDI*,WIDE2-1:<IGATE,MSG_CNT=0,LOC_CNT=5
Of these, the only one that shows up in the Nuvi is K7EK-7.
Tom KD7LXL
On Mon, Jun 29, 2009 at 9:06 PM, Scott Miller<[email protected]> wrote:
>
>
> It shouldn't be filtering anything. Can you send me some examples of
> the packets as they appear on the air? I'll see if I can duplicate the
> problem.
>
> Scott
>
> Tom Hayward wrote:
>>
>>
>>
>> I noticed today (well, a few days ago actually, but I've been
>> monitoring it more since...) that I'm not seeing tactical calls on my
>> Nuvi 350. It's connected to a D710 via GTRANS cable. The Nuvi's
>> Favorites list has a number of ham calls in it, but I tried to
>> navigate to another ham's home the other day and his station wasn't
>> listed in the Nuvi. The tactical call for his home WIDE1-1 digipeater
>> is USEA. I noticed I'm not seeing the digipeater VBALDI, or local
>> repeater objects on the Nuvi 350 either. These are all listed in the
>> D710, so I know they decoded and should have been sent to the GTRANS
>> cable. I have filtering disabled in the D710.
>>
>> So, what's going on? Is the GTRANS cable filtering these? The Nuvi 350
>> can't accept four- or six-letter waypoints? Does the D710 not output
>> waypoints if the position has not changed (should I clear the list on
>> the D710)?
>>
>> Thanks
>>
>> Tom KD7LXL
>>
>>
>
>
