Hmm, not what I saw. I'll check again. Is this regardless or whether it is just powered up? Best regards, Fred
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Scott Miller Sent: Tuesday, June 30, 2009 12:29 To: [email protected] Subject: Re: [tracker2] Re: Garmin and NMEA mode on A/B? It just says POSITION GPS if it doesn't have a fix, or POSITION <coordinates> if it's in fixed position mode. Scott Fred Hillhouse wrote: > > > > Hi Scott, > > What does it do when there is no fix? Hmm, it is almost lunch and I can > go check. > > Thanks! > Fred > > ---------------------------------------------------------- > *From:* track...@yahoogroup <mailto:tracker2%40yahoogroups.com> s.com [mailto:track...@yahoogroup <mailto:tracker2%40yahoogroups.com> s.com] > *On Behalf Of *Scott Miller > *Sent:* Tuesday, June 30, 2009 11:24 > *To:* track...@yahoogroup <mailto:tracker2%40yahoogroups.com> s.com > *Subject:* Re: [tracker2] Re: Garmin and NMEA mode on A/B? > > Hi Fred, > > POSITION will read out your current position if it has a fix - it'll > say > POSITION GPS and your coordinates. > > No, there's no way to get it through KISS. > > Scott > > Fred Hillhouse wrote: > > > > > > > > "Make sure BMODE is AUTO and BBAUD is 4800, and then try the POSITION > > command to see if it's got a valid fix." > > > > Hi Scott, > > > > I was thinking that POSITION was only for setting the location of > the > > station or telling the T2 to listen to the GPS. Does the > statement above > > imply the I can get my current position by entering POSITION? > > > > If so, Is there a why through KISS to request the position > information? > > Or, is it only available through the command line? > > > > Thanks! > > Fred > > > >
