Hi,
When you are in OTWCFG, check what PORTB is set to. On my T2s
(standalone and in the 301) it defaulted to handshaking for port A. If
you set Port A to AUTO and Port B to AUTO all should be good. I run my
T2-301 with a computer connection on port A and the GPS goes into port B.
If that doesn't work, put the GPS onto Port A and monitor with another
TNC or using the internet if you are within range of an Igate.
Regards,
Dave VK4TDI
ve5bjm wrote:
> I am setting up the t2-301 for the first time.
>
> I set the position with a latitude and a long...and it worked fine.
>
> Now introduce a GPS. Lowrance output Nema data sentences....does the gps
> need to output only one sentence or can it output more?
>
> I hooked the gps to port b.....and I have a computer hooked to port a.
> Do I need to use porta for the gps? thinking I would like 2 lines for the
> setup without having to switch ends.
>
--
David Ingram (VK4TDI)
To avoid spam trap, send email to dave at ingramtech dot com
Brisbane, Queensland, Australia
W: http://www.ingramtech.com/
MH: QG62lm
