Make sure you have the back lightning set up. A 15 ohm current limit
resistor at 5 volts works well. See LCD instructions on wiring this. On
boot up the LCD displays "Tracker2" and the the firmware version number
on mine.
Good luck & 73,
John - N5TIM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
John Galvin - N5TIM
http://www.qsl.net/n5tim for Public Service Info
http://www.garlandraces.net/
JUNK - Stuff we throw away ... STUFF - Junk we keep!
Broncus wrote:
Hi Scott (or anyone with an LCD),
Is there a boot screen that is sent to the LCD on power up?
I finally wired one up and it is blank on the bench without a radio
connected.
Thanks!
Best regards,
Fred
