Hi John, Thanks! I had the LCD bias set too dim.
Best regards, Fred --- In [email protected], John Galvin <jrgalv...@...> wrote: > > Make sure you have the back lightning set up. A 15 ohm current limit > resistor at 5 volts works well. See LCD instructions on wiring this. On > boot up the LCD displays "Tracker2" and the the firmware version number > on mine. > > Good luck & 73, > John - N5TIM > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > John Galvin - N5TIM > http://www.qsl.net/n5tim for Public Service Info > http://www.garlandraces.net/ > > JUNK - Stuff we throw away ... STUFF - Junk we keep! > > > > Broncus wrote: > > > > > > Hi Scott (or anyone with an LCD), > > > > Is there a boot screen that is sent to the LCD on power up? > > > > I finally wired one up and it is blank on the bench without a radio > > connected. > > > > Thanks! > > > > Best regards, > > Fred > > > > >
