I haven't made the source code for the GTRANS available, but if you're just reprogramming the board for some other purpose, you could start with the OpenTracker+ RT code - it'll load on the AW32 MCU. I think the GTRANS should be loadable using otwincfg. The ADSUpdater utility is basically otwincfg with everything but the firmware load portion removed.
It still might not be quite what you need, though. The Garmin side of the board puts out 0-3.3v and doesn't use the RS232 transceiver. Scott [email protected] wrote: > > > I was wondering the location of the newest version and the source of the > firmware. There were messages on this forum about using a serial cable > to reflash the GTRANS processor. > > I was thinking of maybe reprograming the processor to convert an Oregon > WMR-968 weather station data stream to one of the weather stations that > the Kenwood D710 decodes. That way I could get rid of having a dedicated > computer so I can send my weather information to the Kenwood D710 > directly. From the WMR-968 display console, then serial to the GTRANS > processor for conversion to the 3.5mm connector feeding into the D710. > > It would be a fun project. > > Dwaine > VE3GIF > > Sent from my BlackBerry device on the Rogers Wireless Network > >
