Is it lit continuously, or does it just blink? Scott
n3ujj wrote: > > > > Scott, > > When looking at the board under magnifier, I notice it's LED1 that > light's gren (it's marked "red", LED 2 (marked grn) does not light > > Crystal is not shorted > > Scott (n3ujj) > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > Scott Miller <sc...@...> wrote: > > > > Hmm, does the crystal on the T2-135 board look OK? Leads aren't shorted > > or anything? If only one LED is stuck on, that's usually a sign of a > > clock oscillator failure. > > > > Scott > > > > n3ujj wrote: > > > > > > > > > Just got my T2-135, and I am installing into a DR-06T (6-meter rig) > > > > > > The DR-06T will except EJ-41U (per the manual, and options on the > Alinco > > > site). > > > > > > Talked to Scott before the purchase and he felt as long as it fit > inside > > > it should work... > > > > > > Installation could not be easier, when I enable the TNC (FUNC+SQL) > only > > > the green led lights up (no flashing just lights up) > > > > > > Otwincfg.exe will not connect, and I can't get anything via hyperterm. > > > > > > I did jumper 2&3 (on db9) and what I type is echoed (so I know com > port > > > is ok) > > > > > > Looking for suggestions > > > > > > Thanks in advance, > > > > > > Scott Gillis (N3UJJ) > > > > > > > > > >
