ok, I will hang on to the cable, I will check with radio shack and see if
they can supply one, if not, I will order a null modem adapter from you.
Thanks
----- Original Message -----
From: Scott Miller
To: [email protected]
Sent: Sunday, September 13, 2009 8:21 PM
Subject: Re: [tracker2] Garmin Nuvi 350
I wasn't thinking when you said you used a gender changer.. it needs to
be a null modem adapter, to switch pins 2 and 3. I stock the
low-profile male-male adapters that fit on the DR-135.
Scott
Teddy Banks wrote:
>
>
> Mine still shows Where to, View Map, and Travel Kit.
>
> ----- Original Message -----
> *From:* Brian Clark <mailto:[email protected]>
> *To:* [email protected] <mailto:[email protected]>
> *Sent:* Sunday, September 13, 2009 6:45 PM
> *Subject:* Re: [tracker2] Garmin Nuvi 350
>
>
>
> tbanks204 wrote:
> > Well, got my cable, it had a female DB-9, so I used a Gender
> Changer on it, connected it to my Nuvi-350, powered up the Alinco
> DR-135 radio with the T2-135, TNC, set profile A to Garmin, 4800,
> auto baud, powered up the Nuvi-350, Ver 6.10 firmware I think, and
> no extra menu, Not working. Any Ideas? Thanks
> >
> >
> I'm using an OT2m with the Nuvi 350. I do not have autobaud checked.
> Also, I thought I had a problem because I didn't have an extra menu.
> When I looked closer, the top menu button had changed to "Dispatch."
> the messaging and locations are there.
> --
>
> Brian Clark, W4SOU
>
>
