Tim, Wiring looks good. Just make sure you do not have the HT jumper set inside the OT2.
Larry K7YBZ --- In [email protected], "kb4pzo" <kb4...@...> wrote: > > After reviewing the documentation here is what I've come up with for a cable > to connect my radio (Yaesu FT-7800) Data Jack to the OT2m "Radio" connector. > Any feedback would be greatly appreciated especially if you already have a > OT2m working with a FT-7800 or FT-8800. > > OT2m pin 1 Audio out to FT-7800 pin 1 Packet Data Input > OT2m pin 2 no connection > OT2m pin 3 PTT out to FT-7800 pin 3 PTT (Gnd to xmit) > OT2m pin 4 no connection > OT2m pin 5 Audio in to FT-7800 pin 5 1200 bps Packet Data Output > OT2m pin 6 Ground to FT-7800 pin 2 Signal Ground > OT2m pin 7 no connection > OT2m pin 8 no connection > > Thanks in advance, > Tim > KB4PZO >
