Larry, Thanks much, always good to have another set of eyes look things over. Also noted regarding NOT setting the HT jumper.
Tim --- In [email protected], "k7ybz" <k7...@...> wrote: > > Tim, > > Wiring looks good. Just make sure you do not have the HT jumper set inside > the OT2. > > Larry > K7YBZ > > --- In [email protected], "kb4pzo" <kb4pzo@> wrote: > > > > After reviewing the documentation here is what I've come up with for a > > cable to connect my radio (Yaesu FT-7800) Data Jack to the OT2m "Radio" > > connector. Any feedback would be greatly appreciated especially if you > > already have a OT2m working with a FT-7800 or FT-8800. > > > > OT2m pin 1 Audio out to FT-7800 pin 1 Packet Data Input > > OT2m pin 2 no connection > > OT2m pin 3 PTT out to FT-7800 pin 3 PTT (Gnd to xmit) > > OT2m pin 4 no connection > > OT2m pin 5 Audio in to FT-7800 pin 5 1200 bps Packet Data Output > > OT2m pin 6 Ground to FT-7800 pin 2 Signal Ground > > OT2m pin 7 no connection > > OT2m pin 8 no connection > > > > Thanks in advance, > > Tim > > KB4PZO > > >
