You can't use port B on the T2-135 for Garmin mode - it's input only.
Works fine on the OT2m.
Scott
Lynn W. Deffenbaugh (Mr) wrote:
>
>
> One consideration if you're using the T2-135 embedded in an Alinco
> (possibly the external OT2m is the same, but I don't run one personally)
> is that the Nuvi 350 cable is natively wired for Port A. If you want to
> use it on Port B, you'll have to have a splitter in line all the time.
>
> Even if Port A is in Garmin mode, you can still break into the command
> prompt via a terminal emulator immediately after power-up.
>
> Lynn (D) - KJ4ERJ - T2-135s as KJ4ERJ-9 and KJ4OVQ-9
>
> kb4pzo wrote:
> > Everyone,
> >
> > While I'm waiting for my OT2m to arrive I'm trying to decide which
> serial port to connect the nuvi 350 to. My fist thought was use Port A
> however now that I've done more reading it seems like it might be good
> to connect the nuvi to Port B and leave Port A available for Command
> Console Input. This is based on the information that EITHER port can be
> configured to Garmin mode, but ONLY Port A can act as Command Console
> Input. Does anyone have experience and/or suggestions connecting nuvi
> 350 to Port B and using Port A as Command Console input?
> >
> > Thanks in advance,
> > Tim
> > KB4PZO
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
