Lynn, Scott, Thanks for the input! I'm looking forward to receipt of my OT2m and getting it into the mobile.
Tim --- In [email protected], Scott Miller <sc...@...> wrote: > > You can't use port B on the T2-135 for Garmin mode - it's input only. > Works fine on the OT2m. > > Scott > > Lynn W. Deffenbaugh (Mr) wrote: > > > > > > One consideration if you're using the T2-135 embedded in an Alinco > > (possibly the external OT2m is the same, but I don't run one personally) > > is that the Nuvi 350 cable is natively wired for Port A. If you want to > > use it on Port B, you'll have to have a splitter in line all the time. > > > > Even if Port A is in Garmin mode, you can still break into the command > > prompt via a terminal emulator immediately after power-up. > > > > Lynn (D) - KJ4ERJ - T2-135s as KJ4ERJ-9 and KJ4OVQ-9 > > > > kb4pzo wrote: > > > Everyone, > > > > > > While I'm waiting for my OT2m to arrive I'm trying to decide which > > serial port to connect the nuvi 350 to. My fist thought was use Port A > > however now that I've done more reading it seems like it might be good > > to connect the nuvi to Port B and leave Port A available for Command > > Console Input. This is based on the information that EITHER port can be > > configured to Garmin mode, but ONLY Port A can act as Command Console > > Input. Does anyone have experience and/or suggestions connecting nuvi > > 350 to Port B and using Port A as Command Console input? > > > > > > Thanks in advance, > > > Tim > > > KB4PZO > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > >
