All of the ADCs are there, but you'd probably need to solder directly to the leads on the MCU... I don't think any of them are brought out anywhere useful.
Scott Keith VE7GDH wrote: > > > Daus (newbie!) wrote... > > > I have two sensors need to be installed beside the GPS. The output of > > the sensor is an analog one with voltage 0-5V. I expected to get GPS > > data and also those sensors data. > > > > Based on the information that the T2-301 has two Serial Port, can I > > connecting the GPS trough Serial Port 1, and converting the sensors to > > RS-232 output, then connect them to Serial Port 2? > > Does the following page help? There are four ADC inputs on the OT2m. > I assume they are all present in the T2-301, although not brought out to > the DE-9 connector. I don't have a small enough screwdriver beside me > to pop the lid and take a look. Perhaps Scott could comment. > http://wiki.argentdata.com/index.php/Telemetry > <http://wiki.argentdata.com/index.php/Telemetry> > > The one wire bus is brought out to the DE-9, but as Rudy indicated (and > I found out when I got a couple of them) not implemented in the "T2-301 > serial and power" cable. An adapter ahead of the cable would make it > available, or just make your own custom own cable, or use a standard > serial cable and bring it out to a breakout box. > > 73 es cul - Keith VE7GDH > -- > "I may be lost, but I know exactly where I am!" > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
