Hi all, i bought my tracker some weeks ago and finally i found some time to try to set it up together with an IC-706MK II G. I want to use it on HF.
Using the main config tool (otwincfg.exe) in the tuning / diagnostics mode i observed that the audio output frequencies differ with the baud settings. When i tick the 1200 baud box the HIGH tone is about 2200 Hz while LOW is 1200 Hz. This complies with the calibration command (tracker manual rev. 12-9-2009, p.29), If i tick the 300 baud box the tones are 2100 Hz for LOW and 2300 Hz for HIGH respectively. I just want to make sure whether this is correct. I would have expected 1600 Hz and 1800 Hz as discribed under "Baud Rate" on p.18. Maybe someone can confirm these settings... regards, Gerd, dj4kh
