Yeah, the test tones should be the same as the actual tones.  They're
compiled into the AFSK modulator code.

Scott

Gerd Steinruecke wrote:
> Scott,
> 
> thanks for your reply. When i got you right the audio tones in the test mode
> are the same as during real operation? So in my case
> 1200 / 2200 Hz for 1200 baud and 2100 / 2300 Hz for 300 baud? Sorry, but due
> to a current lack of any measurement equipment in my shack i can't find it
> out on my own and i have to ask this (the single tones were measured with a
> simple DMM).
> 
> If that is the case i could live with it, as you mentioned i just would have
> to tune to another center freq on HF.
> 
> Unfortunately PSK-31 (or even PSK-250 for) doesn't work yet wih the T2m ....
> 
> Best regards
> Gerd
> DJ4KH
> 
> 
> ----- Original Message ----- 
> From: "Scott Miller" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, February 28, 2010 7:13 PM
> Subject: Re: [tracker2] Audio frequencies
> 
> 
>> The 300 baud tones have changed a couple of times.  In the source code
>> it's just a couple of DEFINEs and there are notes on how to set them.
>> No one can ever agree on what tones to use for 300 baud, but on SSB it
>> doesn't really - you just need to take the offset into account when
>> setting the dial frequency.
>>
>> Scott
>>
>> dj4kh wrote:
>>>
>>>
>>> Hi all,
>>>
>>> i bought my tracker some weeks ago and finally i found some time to try
>>> to set it up together with an IC-706MK II G. I want to use it on HF.
>>>
>>> Using the main config tool (otwincfg.exe) in the tuning / diagnostics
>>> mode i observed that the audio output frequencies differ with the baud
>>> settings. When i tick the 1200 baud box the HIGH tone is about 2200 Hz
>>> while LOW is 1200 Hz. This complies with the calibration command
>>> (tracker manual rev. 12-9-2009, p.29), If i tick the 300 baud box the
>>> tones are 2100 Hz for LOW and 2300 Hz for HIGH respectively. I just want
>>> to make sure whether this is correct. I would have expected 1600 Hz and
>>> 1800 Hz as discribed under "Baud Rate" on p.18.
>>>
>>> Maybe someone can confirm these settings...
>>>
>>> regards,
>>>
>>> Gerd, dj4kh
>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 
> 




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/tracker2/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/tracker2/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to