How does the Profile switch work on the accessory port? I see that it
is on pin 6. Is it a momentary type of contact?
While on the subject of the accessory port - where would be the best
place in the vehicle to mount the 1-wire temp sensor to get as close to
the actual outdoor temperature as possible? Obviously you want it
outside, but I don't know where in the exterior is the best place.
Thanks!
Phil / w2lie
www.w2lie.net
Long Island Live Scanner Feeds and Forums
Alan wrote:
Thanks,
You could also do a profile switch off the front RJ-45 connector,
without drillin' or solderin'. There is an explanation of my settings
of the profile switch in the scripting area of the OT2 wiki.
http://wiki.argentdata.com/index.php/Scripting#Beacon_on_event
<http://wiki.argentdata.com/index.php/Scripting#Beacon_on_event>
Alan;-)
--- In [email protected] <mailto:tracker2%40yahoogroups.com>,
<wyoming_semi_dri...@...> wrote:
>
> great video, I would like to know more about that profile switch you
put in. that switch looks very neat.
> K7CDL
> Ron
>
>
> From: Alan
> Sent: Sunday, March 14, 2010 11:26 PM
> To: [email protected] <mailto:tracker2%40yahoogroups.com>
> Subject: [tracker2] OT2 interfaced to a Nuvi-350 youtube videio
>
>
>
>
> I made a video of an OT2 to Nuvi-350 interface that is installed in
my wife's car. Posted it on the you tubes.
>
> http://www.youtube.com/watch?v=3UwDM5e61W0
<http://www.youtube.com/watch?v=3UwDM5e61W0>
>
> Alan
>
