Here's a troubleshooting list:
http://argentdata.com/support/otwincfg.html
Scott
Keith VE7GDH wrote:
>
>
> Rob KC6TYD wrote...
>
> > ...after launching the configuration program (OTWINCFG) and then
> > clicking the correct comm port, nothing happens. I can see that the
> > OT2 responds with some blinking however, the Command Console
> > does not start up...
>
> You could try "disable turbo" or power the T2 up after clicking on
> connect, but if it was mine, I would be checking the supply voltage
> and getting an ohmmeter out to check the cable about now. Maybe
> there's no communication from the T2 to the PC. Don't just assume
> the cable is good because it worked before. Of course, the
> microcontroller could be shot. Based on your comment, I don't
> think that the 2N7000 is b/o.
>
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
