I've been using an OpenTracker 1+ with a Peet Ultimeter 100 weather station and it's been working great for almost two years.
Wanting to have the ability to control it remotely I bought an OT2m and am having trouble setting it up to work like the OT1 and am looking for suggestions from someone who might have gotten one working. The OT2 is set to transmit every 5 minutes. (3000 sec) Serial ports are set to 2400/auto and wx data in on port A. GPS position is fixed. Problems: 1. Setting the Peet 100 in Complete Record mode like used on the OT1 gives weather data reports that are not the same every time. 2. Enabling voltage and temp gives a separate packet at each scheduled transmission, separate from the Text, while the OT1 appends the data to the status message. Text is programmed for a status message every 6 transmissions. 3. Setting telemetry on results in a packet of unknown contents. Any idea of what it represents? The manual doesn't say. Data from testing on 8/4/10 can be seen on aprs.fi under callsign SVFLIR. Look at the times around 1600 for OT2 and at 1708 I went back to the OT1. Any help is appreciated. Cole, AA7RD, Phoenix, AZ
