Hi all, I have seen exactly same problem...been using OT1+ and wanted to change to OT2M with Ultimeter100.... weather data are useless...in beginning only rain data are reported differently ( hourly rain versus rain since midnight)... after a while also other data did show extreme values (temp 1000deg Celsius, barometer 1400hPa, etc..) I first thought thats because I use OT2m also for Digipeater, (hf ingress?) but even if I switch off digi it is very unstable.. so I gave up and reinstalled the old OT1plus in parallel to an OT2m on same radio port. So I have a wx-station and a DIGI...
but be carefull with LEAP YEAR setting of Ultimeter100 ! You need to have this setup correctly in order to have correct data on serial port. vy 73 de Mike OE3MZC sysop OE3XOC-2 --- In [email protected], James Ewen <ve6...@...> wrote: > > On Thu, Aug 5, 2010 at 8:56 AM, Cole <aa...@...> wrote: > > > Problems: > > 1. Setting the Peet 100 in Complete Record mode like used on > > the OT1 gives weather data reports that are not the same every time. > > Perhaps the weather is changing? 8) I'm guessing you have controlled > weather conditions that are not all being reported the same. > > > 2. Enabling voltage and temp gives a separate packet at each > > scheduled transmission, separate from the Text, while the OT1 > > appends the data to the status message. Text is programmed > > for a status message every 6 transmissions. > > Click the "In Comment" radio button to have the status message tagged > onto the end of the packet rather than as a separate status text. > > > 3. Setting telemetry on results in a packet of unknown contents. > > Any idea of what it represents? The manual doesn't say. > > The telemetry packets are sending telemetry values as read from the > various telemetry inputs... > http://wiki.argentdata.com/index.php/Telemetry > > James > VE6SRV >
