Alan finally i found this one on the web http://www.repeater-builder.com/kenwood/pix/6-pin.gif
where should i connect them on my OT2? thanks all for your mail they are appreciated ,be sure. gervais ve2ckn -------------------------------------------------- From: "Alan" <[email protected]> Sent: Saturday, September 04, 2010 10:45 PM To: <[email protected]> Subject: [tracker2] Re: tk-705 > 705D should work pretty good. Some models have the accy plug on the back > that have everything. Might have to adjust front end cans in a half a turn > for better RX. > > You can use the modular mic. Not sure, but RX audio is routed out on Pin 7 > of many modular mics. If it's not there pin 7 is available for speaker > audio. > I will post a PDF of many Kenwood mic pinouts in the files section. > KenMICs.PDF > > Pin 1 Up > Pin 2 8VDC > Pin 3 Chassis GND > Pin 4 PTT > Pin 6 MIC hi > Pin 7 RS audio* > Pin 8 Down > > Alan > > --- In [email protected], "gervais" <ve2...@...> wrote: >> >> >> hi all >> >> as someone ever connected an OT2 on a kenwood Commercial TK-705? >> >> if you have the pinnout of the connection it would be great for me >> >> thanks >> >> gervais ve2ckn >> > > > > > ------------------------------------ > > Yahoo! Groups Links > > > >
