well Alan i will connect it directly from the RG6 too the DB9 of the OT2. tomorrow i will go at the telephone store and buy an RG6 cable ,,,about 2 or 3 feets. thanks again
Gervais -------------------------------------------------- From: "Alan" <[email protected]> Sent: Sunday, September 05, 2010 3:42 PM To: <[email protected]> Subject: [tracker2] Re: tk-705 > > Glad you found it. You could cut out the hook pin 6, and route speaker > audio out to RG-6. > > Or use the 1/8 audio plug on the back of the radio to route audio to > your dB9 cable. > > mic ----------- dB-9 > pin 1-----------pin 7 - switched B+ 12volt .5 amp > pin 3-----------pin 3 - PTT > pin 4-----------pin 6 - ground > pin 5-----------pin 1 - mic hi > 1/8 speaker--pin 5 - speaker audio > > The switched B+ is fused on pin 1 and can power the OT2, and a probably > a low draw GPS without popping the fuse. > > > > > > > > ------------------------------------ > > Yahoo! Groups Links > > > >
