Hi TREG - We have the "opportunity" to purchase a cheaper transformer which will meet the requirements of UL 1459 instead of UL 1950. I understand that we can comply with either standard until March 2000 or 2001 and UL 1459 is getting talked about around here. Our product is an ISA card that will fit into a PC. I would rather go with UL 1950 because the PC would be tested to that (right?), because I have heard that we would need to install a fuse in the front end to comply with UL 1459 and because UL 1950 is more compatible with international standards.. My boss is looking to save cost so he wants UL 1459 and answers my desire with the fact that we will have multiple boards (one for USA/Canada, one for international), so we could use this transformer for the domestic board, although the issue of whether Canada would accept UL 1459 is not resolved. Also, the "fuse", he says, would be the etch on the board because they would just peel off with the overvoltage testing of UL 1459. I am not comfortable with that, though. Anyway, I want to go with UL 1950 but I need ammunition. I was wondering if you could help me understand the difference between UL 1459 and UL 1950 and also give me your recommendation on which to test to. Any help that you can give would be greatly appreciated. Thanks in advance.
- Dave Spalding David Spalding Motorola ISG 20 Cabot Boulevard M2-250 Mansfield, MA 02048-1193 Phone: (508) 261-4742 FAX: (508) 339-2346 EMail: [email protected]
