Benoit Nadeau wrote: > Bonjour de Montreal, > > I am presently looking for an outside test laboratory that is capable > of > performing a Normalized Site Attenuation test according to the latest > version of CISPR22, ANSI C63.4 and the 1997 edition of the VCCI > requirements (with a 80 MHz tuned dipole from 30 to 80 MHz). > > We have two sites to qualify, a 3 meters (5 meters height) > semi-anechoic > chamber and an all-weather 10 meters Open Area Test Site. Matrox is > located > in Dorval (Quebec) Canada on the Montreal island (5 Km north of Dorval > > airport). > > Can anybody can guide me to providers of that type of services or > share > some experiences (good or bad). > > Thank you in advance, > > --------------------- > ---------------------------------------------------- > Benoit Nadeau, ing. M.ing. (P.eng., M.eng) > Gerant du Groupe Conformite (Conformity Group Manager) > Matrox <http://www.matrox.com/> > - > ------------------------------------------------------------------------ > > 1055, boul. St-Regis > Dorval (Quebec) Canada > H9P 2T4 > > Tel : (514) 969-6000 (x2475) > FAX : (514) 969-6275 > Internet : [email protected], <mailto:[email protected]>
EMC Compliance Management Group can help you calibrate your sites in question. In fact, we just successfully completed an NSA on our own 3 meter anechoic chamber in Mountain View, CA. according to the specs you mentioned in your e-mail to the emc-pstc. We have many years experience in this field. Please e-mail me direct. Best Regards, ----------------------------------------------------------------------------- Michael J. Azar Senior Program Manager EMC Compliance Management Group--Your EMC Department-- ------------------------------------------------------------------------------ 650-988-0900 650-988-6647 [email protected] http://www.emc-turntech.com
