From: "Ian Chapman" <[email protected]> Subject: RE: More UK IEE Seminars
>---------- >From: Chaman Bhardwaj[SMTP:[email protected]] > >Subject: FCC-15 or CISPR-22 Radiated emissions measurement freq. range > >>Hello treggers; >> >>I have a question about, now a days these Pentium processors >can >>be operated at much higher frequencies. The outside clock >>circuit (crystal or oscillator circuit) has a freq. of 100MHZ >and >>inside the CPU package, I mean to say on the silicon die the >>address and data bus speeds are 1GHZ (may be in future) . >Given >>this scenario for a particular design using this type of CPU >>circuits, the highest frequency to be scanned for RE tests >would >>be what? My answer to this question is 5 GHz. Please make >any >>kind of remarks! Part 15.33b, 500MHz to 1GHz measure to 5GHz above 1GHZ measure to 5th harmonic or 40GHZ, the lower. >> >>Your prompt replies will be appreciated very much! >>Thank you. > >Chaman Bhardwaj >(microvolt.com) > > > > >[email protected] on 02/22/98 09:40:48 PM > >Please respond to [email protected] > >To: [email protected], [email protected] >cc: >Subject: More UK IEE Seminars > > > > >23 Feb, Antennas+propagation Web Site >http://www.iee.org.uk/Events/e23feb98.htm >24 Feb, Low cost antenna technology >http://www.iee.org.uk/Events/e24feb98.htm >Regards Andy Griffin >__________________________________________________ > EMiSoft Limited - Test and Assessment > Software Solutions > > Uk Tel +44 (0)468 188244 > Uk Fax +44 (0)1793 522214 > USA Tel/Fax +408 356 1980 > Email [email protected] > Web http://www.emisoft.co.uk > EMC Seminars http://www.emisoft.co.uk/special/links/index.htm >__________________________________________________ > > > > > > > > >
