Hi Rich Thank you for your valued comments. Be rest assured we would not publish any comments without prior approval and would naturally give the source full credit. My reply to Bill Lyons also explains where we are coming from on this subject.
Best Regards Alan E Hutley Editor and Publisher UK EMC Journal -----Original Message----- From: Rich Nute <[email protected]> To: [email protected] <[email protected]> Cc: Roger Volgstadt <[email protected]>; Product Safety Technical Committee <[email protected]> List-Post: [email protected] Date: Thursday, February 26, 1998 05:30 Subject: Re: Publishing Q&As > > >Hi Alan: > > >The material posted to the IEEE emc-pstc listserver is the private >material of the individuals who posted the material. As such, we, >the administrators of this listserver, cannot give you permission to >use any material. > >Please do not use or re-publish any material distributed by this >listserver unless you have the specific permission of the author. > > >Best regards, >Rich and Roger >co-administrators, IEEE emc-pstc listserver > > >ps: I am aware of at least one organization that used my material > taken from my postings to this listserver in a website and in > company documents intended to be distributed to their customers. > They did so without contacting me, and I learned about it quite > inadvertantly after it had been done. Fortunately, they were > quite gracious about the situation and stopped their activity > immediately upon my request. > > The postings to this listserver are private messages distributed > to a specific and limited group of people, our subscribers. > These are not public comments and must not be used elsewhere without > the specific persmission of the author. > > If you want to discuss this matter further, please send e-mail. > We don't need to supplant the technical discussions with this > discussion. If the policy mentioned above is wrong for any > reason, Roger and I will post another message with the necessary > corrections. > > > > >
