Jayesh, The US is more stringent on safety than the EU. If the product falls under UL 1950, essentially EN 60950 with national differences, it must be listed with a NRTL such as UL, MET, ETL, etc. to be installed in the US. The NRTL will require periodic visits to the factory as a condition of their listing.
Good luck, Dick Shultz On 1/26/99 7:53 AM Jayesh Vadgama <[email protected]> said >Gentlemen, > >I hope one of you could assist. > >My question is, if the factory is approved to build product to directive >91/263/EEC. What approvals does the factory need to build product for >shipping to the US, or is directive 91/263/EEC accepted by the US. > > > >Jayesh Vadgama >Hardware Engineer >MSU UK Ltd >Tel: +00 44 1908 232 100 (extn 24) >Fax: +00 44 1908 231 321 >Mobile: 0411 526293 >mailto:[email protected] >http://www.msu.co.uk
